NEW
Tink Cappuccino Marble Patterned PVC Panel 41X62 cm
STOK KODU
EFUVX167
17,10 USD
15,53 USD VAT added
PRODUCT TECHNICAL SPECIFICATIONS
- It is produced in Türkiye by UV printing the patterns of natural stones and marbles extracted from our country and different parts of the world onto a 0.5 mm thick special PVC material and then laminating it with a strong double-sided tape.
- The natural marble look panels are printed symmetrically, so you can create different pattern combinations when joining panel pieces together.
- You can use Tink PVC marble look panels on walls, kitchen countertops and floors of homes by sticking them on existing tiles etc. without breaking or removing them.
- The product is ODOURLESS.
- Suitable for INDOOR use.
- Recreate your living spaces with marble-looking panels without needing a master, breaking or shedding anything.
- The marble look panel is not a sticker, foil or label.
- Made in Türkiye with UV printing on 0.5 mm thick environmentally friendly PVC.
- It can be adhered to any material with a smooth surface such as ceramics, tiles, MDF-lam, laminate flooring, metal and marble.
- It can be cleaned with any type of surface cleaner.
- The colors do not fade or come off.
- After removing the protective tape on the back of the PVC panel, press it firmly and stick it onto the surface you will apply it to.
- If you want to remove the PVC panel you have glued, do not use your nails.
- After removing it using a spatula or screwdriver tip, you can stick it somewhere else.
- PVC marble look panel does not leave any stains where it is removed.
- The PVC marble look panel should be protected from fire, and hot pots, teapots, etc. should be avoided on it.
- It can be cut to the desired size with the help of a SCISSORS.
BEFORE IMPLEMENTATION
- We recommend that you plan the pattern formation by placing the panels side by side before application.
- It is important that the surface to be bonded is flat, clean and dry.
- Before the bonding process, it is necessary to close the joint gaps that will cause water ingress to the bottom with dermismatic or silicone.
APPLICATION
- You can cut Tink PVC marble look panels with scissors. If you stick them crookedly, you can remove them and stick them again.
- Stick it lightly at first, if it is properly and correctly stuck, press it firmly with a dry and soft cloth to ensure full adhesion.
CLEANING
- You can clean Tink PVC Marble panels using a soft cloth and detergent.
WARNING
- We do not recommend applying it to the floor in areas with heavy walking traffic.
- If you want to use it on large surfaces, we recommend that you first try it by purchasing the 1 m2 package.
Be the first to review this product!